Flying Scarab Host: Pit of Pestilence | resin model made by Rescale Miniatures | 92mm Base

Bring your adventures to life with this highly detailed 3D printed miniature. Perfect for Dungeons & Dragons, Pathfinder, and other tabletop RPGs, this model is printed in high-resolution resin to capture every intricate detail.
-Features-
-Professionally 3D printed in durable UV-cured resin
-Crisp, high-resolution details
-Perfect for painting and customization
-Great for display or tabletop play
-Finish: Unpainted (ready for priming & painting)
-Notes-
-Miniatures may require light sanding or assembly.
-Bases included (if applicable).
-Colors may vary slightly due to resin batches.
-Shipping-

“Adventure shouldn’t come with extra fees—so all orders ship FREE! 🎲✨ Whether you’re summoning heroes or monsters, they’ll march straight to your door at no extra cost.”

-Printing-

These miniatures are printed using Elegoo gray resin at a vertical resolution of .05mm and an 8K screen resolution. This makes for a high level of detail and a great painting experience. Also doesn’t shrink as much, requiring less filling and in many cases a perfect fit. I try my best to clean all the supports from models with minimal pits. If a print doesn't meet my standard I will try printing it again.

-Prepping--
How Your Mini or Model Prepares for the Journey
Every miniature goes through a heroic ritual before setting off to your table:
-The Cleansing- Supports are banished, and the figure is washed in alchemical spirits (%99 isopropyl alcohol) to purify its form.
-The Sunlight Trial- Bathed in magical UV light for no less than 5 minutes, the miniature hardens its armor for the adventures ahead.
-The Polishing Touch- With a touch of fine sanding, the Character Tokens emerges ready for battle or painting!
-The Journey Begins- Safely wrapped in protective wards (packaging), your miniature sets out to find you, arriving ready for adventure.

NOTE: Additional cleaning, sanding, prepping or filling may still be required on your part to fully prepare your model for Their Adventures

-Delivered-
Your miniature has already been cleaned, UV cured, and lightly sanded before shipping—but to get it tabletop and paint ready, a few final steps are recommended:
Check the Parts
-If your model comes in multiple pieces, carefully dry-fit them first to see how they align.
-Make sure you know where each part connects before gluing.
Assembly
-Use a small amount of superglue to join the parts.
-Hold each piece in place for a few seconds to let the glue set.
-For best results, glue one section at a time rather than everything at once.
Gap Filling (Optional)
-Sometimes small seams or gaps may appear where parts connect.
-These can be filled with a bit of modeling putty (like Green Stuff or Milliput).
-Smooth it with a hobby tool or damp fingertip, then let it cure before sanding.
Additional Sanding
-Lightly sand any connection points, seams, or rough areas for a smoother finish.
-A fine-grit sandpaper or hobby file works best.
Final Prep
-Once assembled and smoothed, your miniature is ready for priming.
-Always apply a primer before painting to help paint stick and bring out the details.